The outstanding solution for the core elimination
Having derived strenght from its experience in vibrating technology, SINEX had performed a range of, at the same time, ergonomy and high performing equipment.
Advantages of the SINEX decoring machine :
• Very quick and high quality decoring, from 60 to 120 parts per hour, depending of the casting (cylinder heads, pump casing, intake manifold ...) and the number of cylinders/cycle....
• A machine "tailor made" dedicated to customer requirements
• The equipment is delivered as a package
• Important reduction of the production costs
• Low cost of maintenance
• Distinct improvement in the work conditions
• After-sales service guaranteed
• Soundproof enclosure included
1 - DECORING MODULE THE HEART OF THE SYSTEM
Main features :
• Noise level <85 dba @ 1 m |
• Manual or automatic loading |
• Parts up to 60 kg |
• Avg. Part size (LxlxH) : 450x300x250mm |
• Air supply 6 bars |
• High efficiency decoring |
• Remaining Sand : 3g max. without lumps |
• Sand drainage hopper included |
• Typical cycle* : 60 s |
• Hammering* = 15 s |
• Vibrating * = 45 s (including sequential blowing) Hammering, vibrating and blowing times can be adjusted
|
• Rated Power : from 2x2.2 kw to 2x11 kw
|
*To be confirmed after tests dependings on parts size.
2 - AUXILIARIES
The decoring machine is supplied as a package along with its auxiliaries :
• Pneumatic enclosure
• Electrical and control panel with PLC
3 - SERVICES
A testing machine is available at our facility and allows us to validate the decoring efficiency.
• Our technicians are involved in commissioning and start-up phase at customer place.
• Our technicians will train operating personnel on site.
• Our engineers will design machine as per customer requirements and interfaces.