Electromechanical feeders

transporteur_EME_18_sinex

The Sinex vibrating feeders are used to draw out materials of different densities from silos or from hoppers.
They are particularly advantageous for the transport of products over long distances. They are suitable wherever a change in flow during operation is not necessary

.

General Characteristics :
Length : up to 7 m long
Width : up to 3 m depending on the capacity
Motors : top / bottom / sides
Installation : hanged up or set on the floor
Capacity : up to 2000 m3 / h
Features : low acceleration and high travel
Trough : opened or closed (dustproof covering)
Adjustable capacity : 30 to 100% with variable frequency transmission
Voltage : 230 - 380 V / 50-60 Hz (other: please consult us)

Options : machines hanged up or set on the floor, with or without HR coating steel or special (synthetic rubber ...).
Mounting inclination of 0 ° to 10 °.
Advantages : regular capacity quantity and the possibility of change in motion by slavery to frequency according to different parameters.
Low power consumption, long lifetime, low maintenance.